STEINEL NEO3 Instruções de Operação descarregar pdf (Página 5)

Dear Customer,

Congratulations on pur-

chasing your new STEINEL

cordless hot-melt glue ap-

plicator and thank you for

the confidence you have

shown in us. You have cho-

sen a high-quality product

that has been manufac-

tured, tested and packed

with the greatest care.

Please familiarise yourself

with these operating in-

structions before using this

product because prolonged

reliable and trouble-free op-

eration will only be ensured

if it is handled properly.

With hope your neo3 brings

you lasting satisfaction.

Application

Cordless hot-melt glue ap-

plicator with rechargeable

lithium-ion battery.

The ideal all-purpose glue

applicator for repairs,

making decorations and

handicraft.

Suitable for:

paper, card, cork, wood,

leather, textiles, plastic,

ceramics, foam, tiles etc.

Operating principle and handling

■ Before using for the first

time, please charge for

5 hours so as to prolong

the life of the recharge-

able batteries. (see

Charging/Operation)

■ Insert glue stick into rear

heating duct.

■ To prevent the applicator

from being switched on

unintentionally, you must

press the button for

approx. 3 sec. Green

LED flashes for 15 sec.

■ Press trigger and apply

glue to one side.

■ Firmly press together the

materials being glued,

correcting alignment if

necessary.

■ Final bonding strength

is reached after a very

short time (approx.

2 minutes)!

■ Spot glueing is recom-

mended on long items

with large surfaces.

■ Rigid foam (e.g. poly-

styrene) can also be

glued without a problem.

Merely remember to

apply the hot glue on the

base surface and not on

the polystyrene.

■ When glueing textiles

or similar materials, it is

recommended to apply

the hot glue in "wavy"

lines.

■ Let the applicator cool

down after use.

8 9

Power supply: Charger 230 – 240 V

Battery charging time: 90% in 1.5 hrs., 100% in 2 hrs.

Warm-up time: 15 sec.

Battery run time: approx. 45 min. (continuous operation)

Glue stick: 7 mm dia.

Melting temperature: approx. 190 °C (electronically controlled)

Recommended glue sticks: Genuine STEINEL Crystal sticks, prod. no. 040413

Technical specifications

Charging / Operation

System components

 ON/OFF button

 feed trigger

 red LED

 green LED

 charging station

 power cord

 glue stick

Battery charging in base station

Button LED red LED green

OFF Applicator ready for use, battery charged

ON/OFF Battery charging

Applicator ready for use for a limited period

Operation/glueing

Button LED red LED green

ON Switch ON. Press button for approx. 3 sec.

Green LED ﬂ ashes for 15 sec.

Applicator ready for use

Applicator starts for a further 3 min. each time you press

the trigger

No glueing for 3 min.

Applicator switches OFF

Switch applicator back ON at button

Red LED ﬂ ashes after applicator has been in use for 35 min.

The applicator can now only be used for approx. another

10 min.

Red LED ﬂ ashes at intervals of 2 sec.

Rechargeable battery ﬂ at, charge in base station

1 2 3 4 5 6 7 8 9 10 ... 61 62

Comentários a estes Manuais

Sem comentários

STEINEL NEO3 Instruções de Operação Página 5

Comentários a estes Manuais